Page 72 - Tube Tool Catalogue

Brushes & Accessories

Carbon Steel Brushes Brush O.D. Carbon Plastic
Recommended for removing mm inch Steel Brush
soft and light scale deposits 127.0 5 TCS - 5000 T - 5000
152.4 6 TCS - 6000 T - 6000
in straight, ferrous tubes.
178.0 7 TCS - 7000 T - 7000
203.2 8 TCS - 8000 T - 8000
228.6 9 TCS - 9000 T - 9000
254.0 10 TCS - 10000 T - 10000
Plastic Brushes
279.4 11 TCS - 11000 T - 11000
Recommended for removing
305.0 12 TCS - 12000 T - 12000
soft deposits in straight, 330.2 13 TCS - 13000 T - 13000
ferrous and non-ferrous 355.6 14 TCS - 14000 T - 14000
tubes and for final ‘finishing’
Note: Brushes over 1” O.D. require # TCB-C coupling to connect to
up of cleaning in hoses,
TFS-750, TFS-875 and TFS-875-SS
tubes and pipes.
Order brush so that brush O.D. is marginally smaller than tube I.D.

Drill Tip Double Diameter Brushes: These brushes are used to
clean internally grooved tubes. The drill tip of brushes cleans
through hard scale before the brush cleaning action takes over. Drill Tip Nylon Brush
The large diameter of this brush, cleans into the grooves of the
tubes and the small diameter into the lands of the tube’s rifling.

Tube I.D. Drill Tip Drill Tip Drill Tip Brass Brush
mm inch Nylon Brush Brass Brush
25.4 1 TDTBN-1000 TDTBB-1000
31.7 1.1/4 TDTBN-1250 TDTBB-1250

Circular Brush Tools For Straight Tubes

These tools consist of 4 stainless steel circular brushes that
are mounted on a shaft and connected to a Universal Joint.
These tools are used to clean soft to medium scales.
Replacement circular brushes can be ordered when wear
starts.
Circular Brush (for Straight Tubes)

Straight Tube I.D. Circular Brush Brush O.D. Spare Brush Spare Universal
mm inch Tool Model mm inch Model (4 needed) Joint Model
28.6-33.3 1.1/8-1.5/16 TCBTS - 1125 25.4 1 TCBSB - 1125 TUCT - 1063
35.0-39.7 1.3/8-1.9/16 TCBTS - 1375 31.7 1.1/4 TCBSB - 1375 TUCT - 1063
41.3-47.1 1.5/8-1.13/16 TCBTS - 1625 38.1 1.1/2 TCBSB - 1625 TUCT - 1063
47.6-52.6 1.7/8-2.1/16 TCBTS - 1875 44.5 1.3/4 TCBSB - 1875 TUCT - 1250
54.0-58.7 2.1/8-2.5/16 TCBTS - 2125 51.0 2 TCBSB - 2125 TUCT - 1250
60.3-65-1 2.3/8-2.9/16 TCBTS - 2375 57.1 2.1/4 TCBSB - 2375 TUCT - 1250
66.7-71.6 2.5/8-2.13/16 TCBTS - 2625 63.5 2.1/2 TCBSB - 2625 TUCT - 1250
73.0-77.8 2.7/8-3.1/16 TCBTS - 2875 70.0 2.3/4 TCBSB - 2875 TUCT - 1250
79.4-84.2 3.1/8-3.5/16 TCBTS - 3125 76.2 3 TCBSB - 3125 TUCT - 1250

Note: For larger sizes, please enquire.

69